Product Categories

Our Top Sellers


	Live Chat by LivePerson

Store -> Renewable Energy -> Solar Energy -> Solar (PV) Kits -> Residential Solar (PV) Kits -> Grid-tied Kits

enlarge image

ReadySolar Solar In A Box 10kW System

$120,000.00
$66,000.00

ReadySolar Solar In A Box 10kW System Summary

ReadySolar, Solar in a box, is the most cost-effective, reliable, standardized, solar system available.

ReadySolar makes adding a Solar (PV) project to your property extremely simple!

Each assembly is approximately 9' x 6' and consists of 3 individual solar modules.

Each module is designed for rapid installation.

Each module is pre-wired and grounded to NEC code.

Patented mounting frame and brackets: NO racking

Pre-installed micro-inverter NO INVERTER INSTALLATION or DC wiring.

Complete systems arrives ready to install and connect to the load center.

Each system comes with a 5 Year module level monitoring service to view over an internet enabled computer.

Warranty:

Ready Solar comes with industry standard warranty:
25 year power production on solar modules.
10 Years on Ready Solar frame components.
15 Year Industry-leading & 100% Uptime Guarantee on the Micro Inverters.

Pre-installed micro-inverters automatically convert solar modules' DC power to AC.
NO DC wiring, disconnects, or other installation requirements safer, easier, faster.
Micro-inverters maximize energy production, eliminate single point of failure, provide module-level performance monitoring

Ready Solar vs. Traditional Solar

Traditional Solar vs. Ready Solar Chart.

Traditional Solar:	Solar in a Box:
Need to engineer system to match panels with correct inverters	No engineering required as system is pre-engineered and pre-assembled
Right size wiring	Wiring complete
Ground panels together	Grounding complete
Configuring systems around shading	NO DC disconnects
Takes about 1 to 2 days to assemble the parts and mount; done while on roof	Fewer shading issues due to micro inverters.

System comes pre-assembled, just hoist to roof and mount.

Higher Performance:
Micro inverter design allows for high system production under partially shaded conditions and more system uptime.

Better curb appeal:
Low profile design makes the system appear like a skylight on the roof. Micro inverters mean no exterior wall mounted equipment. Plus a good chance your neighbors will be jealous of this new looking system that saves you money!

Modular Design:
Allows homeowner to start with a small system and easily add on in the future!

Quality:
Factory assembly minimizes opportunity for error in installation.

Included System Monitoring:
Industry Leading Warranty, 25 year production guarantee on solar panels, 15 year inverter warranty. Click here for entire warranty information.

Lower Total Life Cycle Cost:
Rooftop units are easy to remove if re-roofing is required.

Safety:
No 600V DC wire from roof down to a central inverter.

Rebates & Economics:
A typical solar state example.
2.5kW system upfront cost $17,125.00
State Rebate: 4.00 per Watt rebate (2500 * 4.00) = $10,000.00
Cost after rebate for a 2.5kW system = $7,125.00
Federal tax incentive rebate (30% of system including installation after rebates have been applied.)
$7,125.00 * 30% = $2,137.50
Net cost of system = $4,987.50
(*Solar rebates vary from state to state, and year to year. To view a list of your current state rebates visit http://www.dsireusa.org/)

1.Rolling solar purchases into a 30 year mortgage allows for positive cash flow each year from year 1 in mo

ReadySolar