Evergreen Solar , 210 Watt 12 Volt Nominal Silver Frame PV Solar Panel

Born in the USA

* Maximum power up to 4.99W above name plate rating
** Locking sleeve not supplied with the panel.
*** For full details see the Evergreen Solar Limited Warranty.

This product designed to meet UL 1703, US 4703, UL Fire Safety Class C, IEC 6215 Ed.2 and IEC 61730 Class A standards.

Electrcial Characteristics
Standard Test Conditions (STC)¹
Pmp²: 210 Watts
Ptolerance: -0/+4.99 Watts
Pmp, max 214.99 Watts
Pmp, min: 210.00 Watts
Nmin: 13.4%
Pptc³: 189.8 Watts
Vmp: 18.7 Volts
Imp: 11.23 Amps
Voc: 23.1 Volts
Isc: 12.20 Amps

Nominal Operating Cell
Temperature Conditions (NOCT)⁴
Tnoct: 44.8°C
Pmax: 153.7 Watts
Vmp: 17.0 Volts
Imp: 9.04 Amps
Voc: 21.0 Volts
Isc: 9.76 Amps
¹ 100 W/m², 25°C cell temperature, AM 1.5 spectrum;
² Maximum Power Point or rated power
³ At PV-USA Test Conditions: 1000 W/m², 20°C ambient temperature, 1 m/s wind speed
⁴ 800 W/m², 20°C ambient temperature, 1 m/s wind speed, AM 1.5 spectrum

Low Irradiance
The typical relative reduction of module efficiency at an irradiance of 200W/m² both at 25°C cell temperature and spectrum AM 1.5 is 0%

Temperature Coefficients
αPmp: -0.45 %/°C
αVmp: -0.43 %/°C
αImp: -0.02 %/°C
αVoc: -0.32 %/°C
αPmp: -0.003 %/°C

System Design
Series Fuse Rating⁵ 20 Amps
Maximum System Voltage (UL): 600 Volts
⁵ Also known as Maximum Reverse Current

Mechanical Specifications
Dimensions: 65.0'' x 37.5'' x 1.8" (1651 x 953 x 46 mm)
Weight: 45.0 lbs (18.18 kg)

Product constructed with 114 poly-crystalline silicon solar cells, anti-reflective tempered solar glass, EVA encapsulant, polymer back-skin and a double-walled anodized aluminum frame. Product packaging test to International Safe Transit Association (ISTA) Standard 2B. All specifications in this product information sheet conform to EN50380. See the Evergreen Solar Safety, Installation and Operation Manual and Mounting Design Guide for further information on approved installation and use of this product.